TPU granules for PU pipe
Polyester-based, transparent, easy processing, high performance,
used for extrusion application.
|Specific gravity (g/cm3)||ASTM-D792||1.22|
|Hardness (Shore A)||ASTM-2240||97|
|100% Modulus (MPa)||ASTM-D412||14|
|300% Modulus (MPa)||ASTM-D412||20|
|Tensile strength (MPa)||ASTM-D412||35|
|Elongation at break (%)||ASTM-D412||480|
|Tear strength (KN/m)||ASTM-D624||142|
3. Processing guide
For optimum results, previous drying of the product during 3-4
hours at 90~100 ℃ is available, in a hot air circulatory, vacuum
Extrusion guideline: 160-185 ℃
4. Package & storage
Never put opened packages exposed in open air for prolonged periods
of time during molding and processing.
Because of the high moisture absorbing property, TPU products shoud
be well stored in a dry, cool and shady area.
Note: These are typical values and should not be used as